Camshaft Milling Machine FNF 10

Design of the Machine

Movements, such as turning of the workpiece (feed), opening and closing of the chucks and steady rests, are controlled by CNC.  Therefore, no templates, stops and cam bars are necessary for the milling program.

Different milling programs can be stored and recalled in the CNC memory according to the type of workpiece to be milled.  Resetting from one workpiece to another is easily accomplished.
A special measuring device is used to feed back machining data to the CNC where a special electronic unit evaluates and activates these correction values into the part program.

Introduction video for FNF-10

Technical Data