US-120 ULTRASONIC CUTTING MACHINE
Static or Conveyorized Tables
|
Machine Configurations and Options for Ultrasonic Cutting Machine US-120 |
|
| Static cutting table | X |
| Static cutting table for Pendulum Operation | X |
| Conveyorized cutting table | X |
| Conveyorized cutting and unloading table | X |
| Conveyorized cutting and unloading table for continuous nest cut. | X |
| Separate conveyorized loading/unloading table | X |
| Zoned cutting table | X |
| Dispensing stand | X |
| Single roll dispenser | X |
| Four roll dispenser with additional position for vacuum membrane | X |
| Cover sheet dispensing stand | X |
| Single layer material handling system | |
| Static cutting table | X |
| Static cutting table for Pendulum Operation | X |
| Conveyorized cutting table | X |
| Conveyorized cutting and unloading table for single nest cutting | X |
| Multi-layer material handling system | |
| Static cutting table | X |
| Static cutting table for Pendular Operation (loading from one side) | X |
| Conveyorized cutting table | X |
| Conveyorized cutting and unloading table for single nest cutting | X |
| Cones for unwind position | X |
| Thermal Transfer printer | X |
| INKJET - Printing in one direction | X |
| INKJET - Printing in two perpendicular directions | X |
| INKJET - Infinitely printing in +/- 90degrees | X |
| Nesting System (Software - PC-Version) | NS2/NS2-PC |
| Pre-Post-Processor Software ( PC-Version ) | AGFM |
| Digitizing System | X |
| Network to Host System | X |
| Remote Support Option | X |
|
Electrical Power Supply for Ultrasonic Cutting Machine US-120 |
|
| Power Supply - Voltage (Machine and Vacuum) 50/60Hz | 480V or 600V |
| Power Supply - Consumption Machine | 10kVA |
| Power Supply - Consumption Vacuum |
29kVA up to 5m 58kVA up to 10m |
| Compressed Air Supply for Ultrasonic Cutting Machine US-120 | |
| Air Supply Pressure | min.6bar abs |
| Air Supply Volume | approx. 10Nm3/hr |
| Cutting Technology for Ultrasonic Cutting Machine US-120 | |
| Ultrasonic generator | GFM |
| Output power | max. 800 Watt |
| Frequency | 20000Hz |
| Noise Level for Ultrasonic Cutting Machine US-120 | |
| Machine without vacuum aggregate | max.78 dB(A) |
| Vacuum Option for Ultrasonic Cutting Machine US-120 | |
| - 29kVA aggregate | max. 82 dB(A) |
| - 58kVA aggregate | max.87 dB(A) |
| Machine Dimensions for Ultrasonic Cutting Machine US-120 | |
| Cutting area | per spec.. |
| X-axis stroke | per spec.. |
| Y-axis stroke | appr. 1800mm |
| Z-axis stroke | 80mm |
| C-axis stroke | n*360 deg. |
| Cutting Speeds | |
| Maximum Cutting speed (X,Y) | 0-120m/min |
| Acceleration/deceleration (X,Y) Rapid move / Cutting | 5.0m/s² / 5.0m/s² |
| Acceleration/deceleration (Z) | max. 15.0m/s2 |
| Acceleration/deceleration (C) | 2500 rad/s2 |
| Machine Accuracy for Ultrasonic Cutting Machine US-120 | |
| Positioning accuracy in X + Y | ±0.075mm |
| Repeatability in X + Y | ±0.03mm |
| Profiling Accuracy (in Mylar) | ±0.15mm |
| Drive System for Ultrasonic Cutting Machine US-120 | |
| Motors | Linear Motors |
| Control System for Ultrasonic Cutting Machine US-120 | |
| Type | AGFM CNC6000 |